Customer matched zone "peninsular"
View cart “4 In 1 MAX7219 Dot Matrix Display Module” has been added to your cart.
-
-
-
RM55.00
- OLED (Organic Light-Emitting Diode) is a self-light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- Add to cart
-
-
-
RM30.00
- This Brand New 1803B DC Motor Speed Controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully the product adjust from 0%-100%. With a self-recovery fuse 2A and a Power-On LED light. Enable to provide a continuous current of 2A to your DC motor or other DC load.
- Add to cart
-
-
-
RM65.00
- The LCD has excellent vivid color contrast. Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (2.4″ diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240×320 pixels with individual pixel control.
- Add to cart
-
-
-
RM5.00
- This is very handy 40-way female to female, 20 cm length of rainbow jumper wires. You will need it for making wire harnesses or jumpering between headers on PCB's.
- Add to cart
-
-
-
RM5.00
- This is very handy 40-way male to female, 20 cm length of rainbow jumper wires. You will need it for making wire harnesses or jumpering between headers on PCB's.
- Add to cart
-
-
-
RM5.00
- This is very handy 40-way male to male, 20 cm length of rainbow jumper wires. You will need it for making wire harnesses or jumpering between headers on PCB's.
- Add to cart
-
-
-
RM190.00
- This is a powerful 24V DC brush motor that is used in electric scooter. With its 300W power and 2650RPM maximum speed, we are strongly believe that it can make your robot rocks!
- Add to cart
-
-
-
RM35.00
- AA simple mechanical structure, very convenient to install. Two deceleration DC motor turning flexible, good direction. The two-drive horsepower chronological. The Chassis large stability is very easy to extend
- Add to cart
-
-
-
RM4.00
- Battery holder for 18650 sized battery Dual-slot Material: recycle plastic Battery sold separately
- Add to cart
-
-
-
RM15.00
- This is NOT an A or AA or AAA type of battery, this is specifically 18650 Li-ion rechargeable battery with rated voltage at 3.7V. DO NOT attempt to replace an A type battery with it.
- Add to cart
-
-
-
RM5.00
- Digunakan untuk penyambungan komponen-komponen 230VAC seperti Trasnformer dan sebagainya.
- Add to cart
-
-
-
RM9.00
- Used in: UK, Ireland, Cyprus, Malta, Malaysia, Singapore, Hong Kong (see complete list of countries on the right) The Type G electrical plug has three rectangular blades in a triangular pattern and has an incorporated fuse (usually a 3 amps fuse for smaller appliances such as a computer and a 13 amps one for heavy duty appliances such as heaters).…
- Add to cart
-
-
-
RM5.00
- Battery holder for 18650 sized battery Tri-slot Material: recycle plastic Battery sold separately
- Add to cart
-
-
-
RM40.00
- This board which operates at 433 MHz frequency range is a remote control relay board that can be used in various electronic and robotic boards, systems which requires remote control and again systems which can be operated remotely.
- Add to cart
-
-
-
RM15.00
- 4-CH RF remote control is used to turn ON / OFF four different devices independently. Any of the four outputs can be configured to work independently in either toggle or momentary mode.
- Add to cart
-
-
-
RM55.00
- MAX7219 is an integrated serial input / output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED.
- Add to cart
-
-
-
RM30.00
- With this 4 digit Seven segment display module, you can easily add a 4 number LED readout to your projects. Useful for making a clock, timer, temperature readout, etc. Just connect 2 pins to your Arduino, Raspberry Pi, or other microcontroller and control all of the LEDs serially!
- Add to cart
-
-
-
RM6.00
- Battery holder for 18650 sized battery Six-slot Material: recycle plastic Battery sold separately
- Add to cart
-
-
-
RM3.00
- A seven-segment display (SSD), or seven-segment indicator, is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot matrix displays.
- Add to cart
-
-
-
RM3.00
- A seven-segment display (SSD), or seven-segment indicator, is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot matrix displays.
- Add to cart
-
-
-
RM2.00
- Kegunaan sebagai penyambung dengan battery 9v.
- Add to cart
-
-
-
RM150.00
- Note: For it is metal gearbox gear motor, some of them may have a little noise, and it is normal phenomenon. Different parameters have their different looks. The lower the speed is, the larger the torque is. Please read the parameter table for a reference before buying. Thanks!!!
- Add to cart
-
-
-
RM150.00
- Note: For it is metal gearbox gear motor, some of them may have a little noise, and it is normal phenomenon. Different parameters have their different looks. The lower the speed is, the larger the torque is. Please read the parameter table for a reference before buying. Thanks!!!
- Add to cart
-
-
-
-
RM75.00
- The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.
- Add to cart
-
-
-
RM35.00
- The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package.
- Add to cart
-
-
-
RM3.00
- Memudahkan penyambungan bekalan kuasa ke arduino.
- Add to cart
-
-
-
RM22.00
- Is super tiny, thin and in Blue. This official Arduino Pro Mini was designed to minimal circuit of Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software).
- Add to cart
-
-
-
RM36.00
- Board Arduino yang paling Basic dan banyak digunakan untuk menjalankan sesuatu Projek elektronik.
- Add to cart
-
-
-
RM180.00
- A bar code reader (or bar code scanner) is an electronic device that can read and output printed barcodes to a computer. Like a flatbed scanner, it consists of a light source, a lens and a light sensor translating for optical impulses into electrical signals.
- Add to cart
-
-
-
RM60.00
- Can be used in supermarket, convenience store, warehouse, library, bookstore, healthcare for file management, inventory tracking and POS(point of sale), etc. Shock-resistant ABS plastic guarantees long service life. Easy grip and ergonomic design make for comfortable fit in your hand. Keyboard Wedge, Serial, Wand Emulation, USB. Supports USA and International keyboard country layouts. Easy to use for shops and warehouse…
- Add to cart
-
-
-
RM28.00
- HC‐05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module,designed for transparent wireless serial connection setup.
- Add to cart
-
-
-
RM15.00
- Breadboard is ideal for beginner to learn in building the circuitry. The breadboard does not require soldering to make connection. Sometimes, it is called as solderless breadboard.
- Add to cart
-
-
-
RM10.00
- Breadboard is ideal for beginner to learn in building the circuitry. The breadboard does not require soldering to make connection. Sometimes, it is called as solderless breadboard.
- Add to cart
-
-
-
RM2.00
- This is a tiny 12 mm continous beep buzzer. These are great since they don't need any type of amplifier, and can be driven directly by a digital I/O on any microcontroller.
- Add to cart
-
-
-
RM9.00
- Perfect for mobile robot, and of course you can use it with Arduino :).
- Add to cart
-
-
-
RM90.00
- This model has the cool ability to accept up to 6 different coins! For example, you can program it for 6 different US coins, or European, or Japanese OR you can have it accept 6 coins from different countries
- Add to cart
-
-
-
RM9.00
- A current sensor is a device that detects electric current in a wire, and generates a signal proportional to that current. The generated signal could be analog voltage or current or even a digital output.
- Add to cart
-
-
-
RM1.50
- The term "DB9" refers to a common connector type, one of the D-Subminiature or D-Sub types of connectors. DB9 has the smallest "footprint" of the D-Subminiature connectors, and houses 9 pins (for the male connector) or 9 holes (for the female connector).
- Add to cart
-
-
-
RM1.50
- The term "DB9" refers to a common connector type, one of the D-Subminiature or D-Sub types of connectors. DB9 has the smallest "footprint" of the D-Subminiature connectors, and houses 9 pins (for the male connector) or 9 holes (for the female connector).
- Add to cart
-
-
-
RM40.00
- Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn’t know how? Well, here’s how: This is a solenoid controlled fluid valve. Simply connect a fluid source to the 1/2" threaded inlet and it will interrupt the flow until specific voltage is applied to the fast-on connectors on the solenoid. For a power…
- Add to cart
-
-
-
RM20.00
- Modeling simple, elegant, LCD panels inline connections, moisture-resistant, strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
- Add to cart
-
-
-
RM1.00
- The 1N4000 series is a family of popular 1.0 A (ampere) general-purpose silicon rectifier diodes, a simple, very common rectifier diode. 3Pieces Per Pack
- Add to cart
-
-
-
RM15.00
- A dot-matrix display is an electronic digital display device that displays information on machines, clocks and watches, public transport departure indicators and many other devices requiring a simple display device of limited resolution.
- Add to cart
-
-
-
RM8.00
- A real-time clock / calendar and 31 bytes of static RAM, via a simple serial interface to communicate with the microcontroller. Real-time clock / calendar circuit provides seconds, minutes, hours, days, weeks, months, years of information, the number of days per month and new year automatically adjusted the number of days. Clock operation by AM / PM indicator decided to…
- Add to cart
-
-
-
RM10.00
- RTC DS3231 is a low-cost, extremely accurate I²C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input, disconnect the main power supply and maintains accurate timekeeping. Integrated oscillator improved long-term accuracy of the device and reduces the number of components of the production line. The DS3231 is available in commercial and…
- Add to cart
-
-
-
RM90.00
- The electrocardiogram (ECG or EKG) is a diagnostic tool that is routinely used to assess the electrical and muscular functions of the heart.
- Add to cart
-
-
-
RM70.00
- An electromagnetic lock, magnetic lock, is a locking device that consists of an electromagnet and an armature plate used for access control door locks. By attaching this to the door frame and the armature plate to the door, a current passing through the electromagnet attracts the armature plate,holding the access control door lock shut.
- Add to cart
-
-
-
RM45.00
- This relay is based on ESP-01S WIFI module. It is designed for smart home, Internet of thing and other DIY project. With this smart relay, you will easy to DIY your smart switch to control any device by your phone anywhere. *Note: ESP8266 wifi module is not included
- Add to cart
-
-
-
RM20.00
- The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
- Add to cart
-
-
-
RM5.00
- Memudahkan penyambungan cable pada satu nodal. 5Pieces Per Pack
- Add to cart
-
-
-
RM25.00
- Digunakan sebagai cooling system Voltage : 12 Vdc Motor : Brushless DC motor
- Add to cart
-
-
-
RM160.00
- Optical fingerprint / biometric sensor module – FPM10A with TTL/UART interface with full firmware support and a windows fingerprint capture software.
- Add to cart
-
-
-
RM8.00
- The flame sensor can be used to detect fire or other light source with wavelength of 760 nm ~ 1100 nm light.
- Add to cart
-
-
-
RM8.00
- This is a small flat coin vibration motor with adhesive backing. Vibration motors are used today in an endless number of applications; these are quality motors used in medical, automotive, consumer, and industrial products.
- Add to cart
-
-
-
RM88.00
- A simple flex sensor, 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove.
- Add to cart
-
-
-
RM30.00
- This is a DC Mini Metal Gear Motor, ideal for making robots. Light weight, high torque and low RPM. Fine craftsmanship, durable, not easy to wear. With excellent stall characteristics, can climb hills easily. You can also easily mount a wheel on the motor’s output shaft.
- Add to cart
-
-
-
RM15.00
- MQ2 is a semiconductor sensor which can detect smoke and flammable gases at concentrations from 300 to 10,000 ppm. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air.
- Add to cart
-
-
-
RM18.00
- MQ3 is a semiconductor sensor which can detect the presence of alcohol gases, Ethanol, and smoke at concentrations from 0.05 mg/L to 10 mg/L. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air.
- Add to cart
-
-
-
RM15.00
- MQ4 is a semiconductor sensor which can detect the presence of methane, compressed natural gas(CNC) at concentrations from 200 to 10,000 ppm. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air.
- Add to cart
-
-
-
RM15.00
- MQ5 is a semiconductor sensor which can detect the presence of LPG, Natural and Coal gases at concentrations from 200 to 10,000 ppm. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air.
- Add to cart
-
-
-
RM15.00
- MQ6 is a semiconductor sensor which can detect LPG, LNG, iso-butane, propane gases at concentrations from 200 to 10,000ppm. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air.
- Add to cart
-
-
-
RM18.00
- MQ7 is a semiconductor sensor which can detect the presence of carbon monoxide gas at concentrations from 20 to 2000 ppm. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air.
- Add to cart
-
-
-
RM15.00
- MQ8 is a semiconductor sensor which can detect the presence of Hydrogen gas(H2) at concentrations from 100 to 10,000 ppm. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air.
- Add to cart
-
-
-
RM22.00
- MQ9 is a semiconductor sensor which can detect the presence of Carbon Monoxide (CO) gas at concentrations from 100 to 10,000 ppm. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air.
- Add to cart
-
-
-
RM60.00
- This low cost yet powerful GPS receiver is based on the famous and high end u-Blox Neo-6M GPS module. It comes with small battery for hot-start, and there is built-in EEPROM too.
- Add to cart
-
-
-
RM90.00
- SIM900A Modem is built with Dual Band GSM/GPRS based SIM900A modem from SIMCOM. It works on frequencies 900/ 1800 MHz. SIM900A can search these two bands automatically. The frequency bands can also be set by AT Commands. The baud rate is configurable from 1200-115200 through AT command.
- Add to cart
-
-
-
RM25.00
- The TCS3200 color sensor can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.
- Add to cart
-
-
-
RM18.00
- GY-521 MPU6050 6DOF 3-Axis Gyroscope and Accelerometer Module is a carrier board based on MPU-6050 sensor which contains an accelerometer and a gyroscope. MPU-6050 sensor contains a MEMS accelerometer and a MEMS gyro in a single chip.
- Add to cart
-
-
-
RM35.00
- ADXL335 triple axis accelerometer module provides easy access to the X, Y and Z axis analog outputs from the accelerometer. It is capable of sensing forces up to 3g in all axis. It can measure the tilt-sensing applications in the static acceleration of gravity, and movement, shock or vibration due to dynamic acceleration.
- Add to cart
-
-
-
RM6.00
- Can be used for motor speed, position detection and other occasions
- Add to cart
-
-
-
RM15.00
- COMPATIBLE WITH ALL ENCLOSURES: Large UVA UVB bulb is compatible with a variety of enclosures, including vivariums, tanks, terrariums, vision cages, and more. Perfect for those in need of reptile UVB light and UVB bulbs (light for reptiles)
- Add to cart
-
-
-
RM15.00
- The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. The DHT sensors are made of two parts, a capacitive humidity sensor and a thermistor.
- Add to cart
-
-
-
RM29.00
- The DHT-22 (also known by AM2302) is a digital temperature and humidity sensor module that works with all of the Arduino micro-controllers. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed).
- Add to cart
-
-
-
RM6.00
- This Infrared obstacle/object detection sensor is super easy to use. It comes with on board potentiometer to adjust the sensitivity.
- Add to cart
-
-
-
RM6.00
- An infrared receiver is used in an IR system to control and operate devices by sending signals.
- Add to cart
-
-
-
RM8.00
- This IR reflective sensor utilizes a TCRT5000 to detect color and distance. It emits IR rays and then detects if it receives the reflection. This sensor is often used in line following robots, auto data logging on utility meters, because this module can sense if a surface is white or black.
- Add to cart
-
-
-
RM15.00
- A simple and easy to use Infra Red remote and Receiver module emits a modulated IR signal (38 kHz carrier frequency, 940 nm wavelength). It has 21 buttons, including directional and number entry buttons, and it uses the NEC encoding type and sends address bytes 0x00 and 0xBF followed by a data code between 0 and 26 (it skips 3, 7, 11,…
- Add to cart
-
-
-
RM60.00
- This DC electric motor, made of high quality material, have good reliability. Great replacement for the rusty or damaged DC geared motor on the machine. Used for automatic window curtain, safe box, robot, optic equipment, electronic game machine, etc.
- Add to cart
-
-
-
RM60.00
- This DC electric motor, made of high quality material, have good reliability. Great replacement for the rusty or damaged DC geared motor on the machine. Used for automatic window curtain, safe box, robot, optic equipment, electronic game machine, etc.
- Add to cart
-
-
-
RM9.00
- PS2 game joystick axis sensor module consists of using original quality metal PS2 joystick potentiometer system For the (X, Y) a 2-axis analog output and for (Z) 1 digital output channel button.
- Add to cart
-
-
-
RM35.00
- The SparkFun Joystick Shield Kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers. Soldering is required,…
- Add to cart
-
-
-
RM25.00
- This 12-button keypad provides a useful human interface component for microcontroller projects. The buttons on a keypad are arranged in rows and columns. A 3X4 keypad has 4 rows and 3 columns.
- Add to cart
-
-
-
RM28.00
- This 16-button keypad provides a useful human interface component for microcontroller projects. The buttons on a keypad are arranged in rows and columns. A 4X4 keypad has 4 rows and 4 columns.
- Add to cart
-
-
-
RM20.00
- Now, with only 3 pins from microcontroller, you can display message on this LCD. Compared to parallel LCD which required at least 6 pins of I/O, this LCD offer more cost effective solution. The LCD display is two lines by 16 characters and provides basic text wrapping so that your text looks right on the display.
- Add to cart
-
-
-
RM45.00
- Now, with only 3 pins from microcontroller, you can display message on this LCD. Compared to parallel LCD which required at least 6 pins of I/O, this LCD offer more cost effective solution. The LCD display is four lines by 20 characters and provides basic text wrapping so that your text looks right on the display.
- Add to cart
-
-
-
RM15.00
- LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications. A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits.
- Add to cart
-
-
-
RM50.00
- LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications. A 20x4 LCD display is very basic module and is very commonly used in various devices and circuits.
- Add to cart
-
-
-
RM25.00
- The LCD Keypad Shield is arduino compactible boards,to provide a user-friendly interface that allows users to display what they want to and make selections etc. it consists of a 1602 white character blue backlight LCD.
- Add to cart
-
-
-
RM10.00
- Applications: Auto led light is widely used for interior light, tail light, stop light ,brake light ,side light, dome light, direction light, dashboard light, packing light and license light etc.
- Add to cart
-
-
-
RM3.50
- Digunakan untuk menghasilkan cahaya yang terang -Colour Tempeture:8000K~9000k -Forward Current :Max 700MA -Flux :180~200LM -Forward Voltage :3.2~3.4V -Power Rating :3Watt -Angle(Degree) :180
- Add to cart
-
-
-
RM1.00
- Untuk indicator sesuatu function Size : 5mm Colour : Green 5Pieces Per Pack
- Add to cart
-
-
-
RM1.00
- Untuk indicator sesuatu function Size : 5mm Colour : Red 5Pieces Per Pack
- Add to cart
-
-
-
RM1.00
- Untuk indicator sesuatu function Size : 5mm Colour : Yellow 5Pieces Per Pack
- Add to cart
-
-
-
RM4.00
- In electrical engineering a limit switch is a switch operated by the motion of a machine part or presence of an object.
- Add to cart
-
-
-
RM250.00
- The linear actuator is widely used in number of industries, such as electric power, machinery, metallurgy, mine, petroleum, chemical industry, transportation, lifting, construction, food and feed processing and so on. With reliable performance, sensitive action stable running, the same characteristics of push and pull and good environment adapt- ability etc.
- Add to cart
-
-
-
RM280.00
- The linear actuator is widely used in number of industries, such as electric power, machinery, metallurgy, mine, petroleum, chemical industry, transportation, lifting, construction, food and feed processing and so on. With reliable performance, sensitive action stable running, the same characteristics of push and pull and good environment adapt- ability etc.
- Add to cart
-
-
-
RM320.00
- The linear actuator is widely used in number of industries, such as electric power, machinery, metallurgy, mine, petroleum, chemical industry, transportation, lifting, construction, food and feed processing and so on. With reliable performance, sensitive action stable running, the same characteristics of push and pull and good environment adapt- ability etc.
- Add to cart
-
-
-
RM370.00
- The linear actuator is widely used in number of industries, such as electric power, machinery, metallurgy, mine, petroleum, chemical industry, transportation, lifting, construction, food and feed processing and so on. With reliable performance, sensitive action stable running, the same characteristics of push and pull and good environment adapt- ability etc.
- Add to cart
-
-
-
RM35.00
- Lithium Battery Rechargeable polymer Li-po. Widely used for remote control model which features high quality and durable performance. This is the best choice for you to enjoy more flying joys. *The brand product not same as shown in the picture
- Add to cart
-
-
-
RM75.00
- Lithium Battery Rechargeable polymer Li-po. Widely used for remote control model which features high quality and durable performance. This is the best choice for you to enjoy more flying joys. *The product brand not same as shown in the picture
- Add to cart
-
-
-
RM58.00
- Lithium Battery Pack - Expansion Board Power Supply Switch Raspberry Pi direka untuk papan Raspberry Pi 3 Model B yang membolehkan ianya berfungsi sehingga 9 jam menggunakan bateri pada tahap operasi yang minima. Penggunaan yang lebih maksimum mengurangkan tahap ketahanan bateri.
- Add to cart
-
-
-
RM38.00
- This straight bar load cell (sometimes called a strain gauge) can translate up to 10KG of pressure (force) into an electrical signal. Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification.
- Add to cart
-
-
-
RM25.00
- This straight bar load cell (sometimes called a strain gauge) can translate up to 1KG of pressure (force) into an electrical signal. Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification.
- Add to cart
-
-
-
RM45.00
- This straight bar load cell (sometimes called a strain gauge) can translate up to 10KG of pressure (force) into an electrical signal. Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification.
- Add to cart
-
-
-
RM30.00
- This straight bar load cell (sometimes called a strain gauge) can translate up to 5KG of pressure (force) into an electrical signal. Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification.
- Add to cart
-
-
-
RM30.00
- An open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. The Module is based on ESP-12/ESP8266 WiFi Module by AI thinker. Module integrates 3.3V Regulator, GPIO, PWM, IIC, 1-Wire and ADC all in one board.
- Add to cart
-
-
-
RM9.00
- Switch Type: NC(normal close type), circuit is connected when magnet is near the switch.
- Add to cart
-
-
-
RM10.00
- This 16-button keypad provides a useful human interface component for microcontroller projects. Convenient adhesive backing provides a simple way to mount the keypad in a variety of applications. The Keypad 4x4 features a total of 16 buttons in Matrix form.
- Add to cart
-
-
-
RM14.00
- This driver module is based on L298N H-bridge, a high current, high voltage dual full bridge driver. It can drive up to 2 DC motors up to 2Amp each, or drive one stepper motor or 2 solenoids.
- Add to cart
-
-
-
RM60.00
- Stepper motor is a motor that moves in discrete steps, one step at a time. It is generally used in a variety of applications where precise position control is desirable such as 3D printer, laser cutter and pick & place machine.
- Add to cart
-
-
-
RM38.00
- The NodeMCU D1 mini V2 is minimal ESP8266 wifi board. The D1 mini is a mini wifi board based on ESP-8266EX. More infos here: http://www.wemos.cc
- Add to cart
-
-
-
RM55.00
- ESP32 is a single 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra-low-power 40 nm technology. It is designed to achieve the best power performance and RF performance, showing robustness, versatility, excellent features and reliability in a wide variety of applications and different power profiles.
- Add to cart
-
-
-
RM20.00
- The NodeMcu is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
- Add to cart
-
-
-
RM38.00
- NodeMCU is the fastest leading edge low cost technologies to WiFi enabled IoT. Modern high-level mature LUA based technology.
- Add to cart
-
-
-
RM58.00
- SCT-013 Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole building electricity consumption (or generation for that matter).
- Add to cart
-
-
-
RM10.00
- This NTC thermistor module has an NTC temperature sensor which gives an only digital output that allows you to easily add over-temperature and under-temperature condition sensing capabilities to your new project.
- Add to cart
-
-
-
RM28.00
- OLED 0.91 inch is a monochrome graphic display module with a built-in 0.91 inch, 128X32 high-resolution display. OLED 0.91inch is able to work despite the absence of backlight. In a dark environment, contrast of OLED display is higher than LCD display.
- Add to cart
-
-
-
RM29.00
- OLED (Organic Light-Emitting Diode) is a self-light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- Add to cart
-
-
-
RM190.00
- This PH sensor Module consists of PH sensor also called as PH probe and a Signal Conditioning Board which gives an output which is proportional to the PH Value and can be interfaced directly to any Micro-controller.
- Add to cart
-
-
-
RM8.00
- LDR sensor module is used to detect the intensity of light. It is associated with both analog output pin and digital output pin labelled as AO and DO respectively on the board.
- Add to cart
-
-
-
RM10.00
- Correlation photoelectric Infrared count sensor module is a high-quality infrared Counter module at a very cheap price which comes with tiny size and integrated LM 393 chip.
- Add to cart
-
-
-
RM15.00
- PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range.
- Add to cart
-
-
-
RM150.00
- It is a compact and high-performance power inverter which can convert DC12V to AC220V. With overload, over temperature, short-circuit, low voltage, over voltage protection, it can efficiently and reliably power a widely use for household AC products, such as computer, fan, etc.
- Add to cart
-
-
-
RM75.00
- The power window motor is originally produced for car's power window. But in recent years, many robot builders use it to build their robot, especially for combat robot due to its performance and competitive price.
- Add to cart
-
-
-
RM15.00
- This is a design for an open-source prototyping shield for Arduino NG/Diecimila. It has tons of cool features, to make prototyping on your Arduino easy. Shipped with fully assembled.
- Add to cart
-
-
-
RM35.00
- Inductive proximity sensors are used for non-contact detection of metallic objects. Their operating principle is based on a coil and oscillator that creates an electromagnetic field in the close surroundings of the sensing surface.
- Add to cart
-
-
-
RM48.00
- Photoelectric sensor with transmitter and receiver 2 in 1 with adjustable distance. Widely used in robot obstacle avoidance, assembly line and many other auto products.
- Add to cart
-
-
-
RM55.00
- Pulse sensor Arduino is used to testing the heart rate sensor, students, artists,athletes, creator, game developer, or mobile terminal can develop interactive work related to heart rate.
- Add to cart
-
-
-
RM2.00
- A push button is a simple type of switch that controls an action in a machine or some type of process. Most of the time, the buttons are plastic or metal. The shape of the push button may conform to fingers or hands for easy use, or they may simply be flat.
- Add to cart
-
-
-
RM85.00
- A solar controller or solar regulator is similar to the voltage regulator in your car. It regulates the voltage and current coming from the solar panels going to the battery. Most “12 volts” panels put out about 16 to 20 volts, so if there is no regulation the batteries will be damaged from overcharging. Most batteries need around 14 to…
- Add to cart
-
-
-
RM10.00
- The rain sensor module is an easy tool for rain detection. It can be used as a switch when raindrop falls through the raining board and also for measuring rainfall intensity.
- Add to cart
-
-
-
RM9.00
- Relay board is one kind of very popular switch module. You can use it control any devices on or off.
- Add to cart
-
-
-
RM15.00
- Relay board is one kind of very popular switch module. You can use it control any devices on or off.
- Add to cart
-
-
-
RM28.00
- Relay board is one kind of very popular switch module. You can use it control any devices on or off.
- Add to cart
-
-
-
RM1.00
- Digunakan untuk mengurangkan laluan Arus Value : 10000 ohm / 1000 ohm Power Dissipate : 1/4 Watt Colour : Brown--Black--Orange 5Pieces Per Pack
- Add to cart
-
-
-
RM1.00
- Digunakan untuk mengurangkan laluan Arus Value : 1000 ohm Power Dissipate : 1/4 Watt Colour : Brown--Black--Orange 5Pieces Per Pack
- Add to cart
-
-
-
RM1.00
- Digunakan untuk mengurangkan laluan Arus Value : 3000 ohm Power Dissipate : 1/4 Watt Colour : Orange--Black--Red 5Pieces Per Pack
- Add to cart
-
-
-
RM1.00
- Digunakan untuk mengurangkan laluan Arus Value : 470 ohm Power Dissipate : 1/4 Watt Colour : Yellow -Violet - Brown 5Pieces Per Pack
- Add to cart
-
-
-
RM5.00
- A MIFARE card has a much larger memory than an RFID card and is widely used in hotels as payment cards and for identification purposes. It is used for identification of objects or people and inventory management.
- Add to cart
-
-
-
RM20.00
- The MF522-AN module is the original Philips MFRC522 chip design circuit card reader, easy to use, low cost, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds.
- Add to cart
-
-
-
RM5.00
- RFID tags are a type of tracking system that uses smart barcodes in order to identify items. RFID is short for “radio frequency identification,” and as such, RFID tags utilize radio frequency technology. These radio waves transmit data from the tag to a reader, which then transmits the information to an RFID computer program.
- Add to cart
-
-
-
RM15.00
- TTL converter module extensively used in serial communication between PC/Device and any TTL compability . It is specially design for respberry pi / robotics
- Add to cart
-
-
-
RM10.00
- Small yet good traction rubber wheel for your robot :)
- Add to cart
-
-
-
RM64.00
- The Sharp Optical Dust Sensor is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air.
- Add to cart
-
-
-
RM9.00
- Sensor ini digunakan untuk membaca kelembapan tanah dan selalu digunakan untuk projek berkonsepkan green house/pertanian.
- Add to cart
-
-
-
RM35.00
- Solenoid is the generic term for a coil of wire used as an electromagnet. It also refers to any device that converts electrical energy to mechanical energy using a solenoid. Voltage :6v-12vdc
- Add to cart
-
-
-
RM12.00
- This module allows you to detect when sound has exceeded a set point you select. Sound is detected via a microphone and fed into an LM393 op amp. The sound level set point is adjusted via an on board potentiometer. When the sound level exceeds the set point, an LED on the module is illuminated and the output is sent…
- Add to cart
-
-
-
RM15.00
- The LM2596 regulator is monolithic integrated circuit ideally suited for easy and convenient design of a step−down switching regulator (buck converter).
- Add to cart
-
-
-
RM18.00
- This is a 28YBJ-48 Stepper Motor with Gear Reduction, so it has good torque for its size, but relatively slow motion. These motors/drivers are made by the millions for A/C units, fans, duct controls etc. which is why they are so inexpensive. Available in 5V.
- Add to cart
-
-
-
RM5.00
- Driver ini digunakan sebagai perantara diantara stepper motor dan Arduino.
- Add to cart
-
-
-
RM35.00
- Flow adjustable water pump is designed fully submersible for both fresh water and saltwater,extremely quiet operation,completely submersible motor,low power consumption and submersible use only and low rate is adjustable with knob in front of the pump
- Add to cart
-
-
-
RM10.00
- Used to trigger the effect of various vibration, reported the theft alarm, intelligent car, electronic building blocks, etc. Please note that this module in the induction to the small vibration triggered when time is short, not enough to drive the relay, according to some people can be directly connected to the relay module, use the effect not beautiful.
- Add to cart
-
-
-
RM12.00
- DS18B20 temperature sensor probe chip with high-quality stainless steel anti-rust waterproof probe housing. Ideal for getting soil temperature, Arduino and other development systems.
- Add to cart
-
-
-
RM12.00
- The LM35 series are precision integrated-circuit temperature devices with an output voltage linearly-proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling.
- Add to cart
-
-
-
RM18.00
- DS18B20 temperature sensor probe chip with high-quality stainless steel anti-rust waterproof probe housing. Ideal for getting soil temperature, Arduino and other development systems.
- Add to cart
-
-
-
RM35.00
- This thermocouple is designed with fork terminals. Specially designed for digital thermometer which has k type sensor, suitable for measuring liquid or others high-temperature applications.
- Add to cart
-
-
-
RM30.00
- Utilized in high-end consumer, commercial, and military-grade applications for extreme performance and maximum energy efficiency, TEC1 Peltier Modules provide unmatched temperature differentials (DTmax) in cooling or heating applications.
- Add to cart
-
-
-
RM15.00
- The DS1307 is a low power, with 56 bytes of non-volatile RAM BCD code clock calendar real-time clock chip, the address and data transmission through the two-wire bidirectional serial bus, the chip can be seconds, minutes, hours and other information , the number of days in each month can be adjusted automatically.
- Add to cart
-
-
-
RM4.00
- A toggle switch is a class of electrical switches that are manually actuated by a mechanical lever, handle, or rocking mechanism.
- Add to cart
-
-
-
RM17.00
- Front and back can be used as a touch surface, can replace the traditional touch buttons 4 M2 screw holes for easy installation
- Add to cart
-
-
-
RM40.00
- MG995 is a digital metal gear high torque servo for airplane, helicopter, RC-cars from 10 to 6-th scale truggy and monster and many RC model.
- Add to cart
-
-
-
RM35.00
- MG995 is a digital metal gear high torque servo for airplane, helicopter, RC-cars from 10 to 6-th scale truggy and monster and many RC model.
- Add to cart
-
-
-
RM18.00
- This is a low cost plastic gear RC servo with 1.80kg.cm holding torque (at 4.8V). It is a perfect solution for student robotic projects who build arms or linkages. The advantage of RC servo over the DC brush motor is the ability to control its rotation angle.
- Add to cart
-
-
-
RM2.00
- It is basically a relay driver IC and it is a darlington array having high voltages and high currents as well. 3Pieces Per Pack
- Add to cart
-
-
-
RM9.00
- Ultrasonic Sensors measure the distance to the target by measuring the time between the emission and reception. The sensor head emits an ultrasonic wave and receives the wave reflected back from the target.
- Add to cart
-
-
-
RM70.00
- Digunakan untuk membunuh Bacteria :- - Bacilifus Arthrecis -Dysentery Bacil -Escherchia coli Virus :- -Pollovtrus 1 -Influenza -Hepatatis B Virus Algae :- -Blue Green Algae -Nematoda Eggs -Green Algae -Protozoa Voltage : 230 Vac Frequency : 50-60 Hz Power : 9 Watt
- Add to cart
-
-
-
RM20.00
- Voice Record Module is base on ISD1820, which a multiple‐message record/playback device.
- Add to cart
-
-
-
RM28.00
- The W1209 is an incredibly low cost yet highly functional thermostat controller. With this module (HCTHER0006) you can intelligently control power to most types of electrical device based on the temperature sensed by the included high accuracy NTC temperature sensor. Although this module has an embedded microcontroller no programming knowledge is required. 3 tactile switches allow for...
- Add to cart
-
-
-
RM9.00
- Water sensor brick is designed for water detection, which can be widely used in sensing the rainfall, water level, even the liquate leakage. The brick is mainly comprised of three parts: An Electronic brick connector, a 1 MΩ resistor, and several lines of bare conducting wires.
- Add to cart
-
-
-
RM12.00
- This is a PP material float switch and contains no mercury. Light weight and simple working principle,high reliability. This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other devices.
- Add to cart
-
-
-
RM15.00
- The Load Cell Amplifier and ADC (Analog-to-Digital Converter) Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.
- Add to cart
-
-
-
RM58.00
- The D1 is a WiFi capable ESP8266 based development board in the form of the Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU. The D1 also features an on-board switching power supply which allows you to power the board from a power supply up to 24V, 11 GPIO pins (can be used as…
- Add to cart
-
-
-
RM45.00
- This module offers a wireless data transmission and reception range of approximately 1 Km in open air. It's a low power radio chip which is ultra easy to use.
- Add to cart
-
-
-
RM75.00
- This is a non-contact water / liquid level sensor for Arduino. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection.
- Add to cart
-
-
-
RM30.00
- DSN6009 4A is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM2577.
- Add to cart
-
-
-
RM55.00
- This sensor sits in line with your water line and contains a pinwheel sensor to measure how much liquid has moved through it. There's an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
- Add to cart