Motor Driver Module (L298N)


This driver module is based on L298N H-bridge, a high current, high voltage dual full bridge driver. It can drive up to 2 DC motors up to 2Amp each, or drive one stepper motor or 2 solenoids.

Add to Wishlist
Add to Wishlist
Categories: ,


The driver can control both motor RPM and direction of rotation. The RPM is controlled using PWM input to ENA or ENB pins, while of rotation direction is controlled by supplying high and low signal to EN1-EN2 for the first motor or EN3-EN4 for second motor. This Dual H-Bridge driver is capable of driving voltages up to 46V.



  • Driver: L298N Dual H Bridge DC Motor Driver
  • Power Supply: DC 5 V – 35 V
  • Peak current: 2 Amp each bridge
  • Operating current range: 0 ~ 36mA
  • Control signal input voltage range :
    • Low: -0.3V ≤ Vin ≤ 1.5V.
    • High: 2.3V ≤ Vin ≤ Vss.
  • Enable signal input voltage range :
    • Low: -0.3 ≤ Vin ≤ 1.5V (control signal is invalid).
    • High: 2.3V ≤ Vin ≤ Vss (control signal active).
  • Maximum power consumption: 20W (when the temperature T = 75 ℃).
  • Storage temperature: -25 ℃ ~ +130 ℃.
  • Size: 3.4cm x 4.3cm x 2.7cm