Customer matched zone "peninsular"
View cart “LiPo Rechargeable Battery 11.1V 1100mAH” has been added to your cart.
-
-
- RM5.00
- This is very handy 40-way female to female, 20 cm length of rainbow jumper wires. You will need it for making wire harnesses or jumpering between headers on PCB's.
- Add to cart
20 Ways Female-Female Jumper cable (20cm)
-
-
-
- RM5.00
- This is very handy 40-way male to female, 20 cm length of rainbow jumper wires. You will need it for making wire harnesses or jumpering between headers on PCB's.
- Add to cart
20 Ways Male-Female Jumper cable (20cm)
-
-
-
- RM5.00
- This is very handy 40-way male to male, 20 cm length of rainbow jumper wires. You will need it for making wire harnesses or jumpering between headers on PCB's.
- Add to cart
20 Ways Male-Male Jumper cable (20cm)
-
-
-
- RM4.00
- Battery holder for 18650 sized battery Dual-slot Material: recycle plastic Battery sold separately
- Add to cart
2xAA Battery Holder
-
-
-
- RM15.00
- This is NOT an A or AA or AAA type of battery, this is specifically 18650 Li-ion rechargeable battery with rated voltage at 3.7V. DO NOT attempt to replace an A type battery with it.
- Add to cart
3.7V 2000mAh Lithium Battery
-
-
-
- RM5.00
- Battery holder for 18650 sized battery Tri-slot Material: recycle plastic Battery sold separately
- Add to cart
3xAA Battery Holder
-
-
-
- RM6.00
- Battery holder for 18650 sized battery Six-slot Material: recycle plastic Battery sold separately
- Add to cart
6xAA Battery Holder
-
-
-
- RM2.00
- Kegunaan sebagai penyambung dengan battery 9v.
- Add to cart
9V Snap Battery
-
-
-
- RM75.00
- The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.
- Add to cart
Arduino Mega 2560 (CH340)-Arduino compatible
-
-
-
- RM15.00
- This product is protective case of Arduino MEGA2560, fastened by ten screws. It is made by high grade acrylic, which provides excellent protection, with fashion appearance. * Note: mega is not included
- Add to cart
Arduino MEGA Arcyclic Casing
-
-
-
- RM28.00
- DFPlayer or DF player Mini is a compact MP3 module that can be connected directly to the speaker. Module with battery power supply, speaker, keypad can be used alone, or through the serial port control, as the Arduino UNO or any microcontroller with a serial port module.
- Add to cart
Arduino MP3 Module TFplayer w/ Micro SD Slot
-
-
-
- RM35.00
- The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package.
- Add to cart
Arduino Nano
-
-
-
- RM3.00
- Memudahkan penyambungan bekalan kuasa ke arduino.
- Add to cart
Arduino Power Jack
-
-
-
- RM22.00
- Is super tiny, thin and in Blue. This official Arduino Pro Mini was designed to minimal circuit of Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software).
- Add to cart
Arduino Pro Mini ATMEGA328P
-
-
-
- RM36.00
- Board Arduino yang paling Basic dan banyak digunakan untuk menjalankan sesuatu Projek elektronik.
- Add to cart
Arduino Uno (CH340) – Arduino Compatible
-
-
-
- RM10.00
- This product is protective case of Arduino UNO, fastened by ten screws. It is made by high grade acrylic, which provides excellent protection, with fashion appearance. * Note: mega is not included
- Add to cart
Arduino UNO Arcyclic Casing
-
-
-
- RM15.00
- Breadboard is ideal for beginner to learn in building the circuitry. The breadboard does not require soldering to make connection. Sometimes, it is called as solderless breadboard.
- Add to cart
Breadboard 16.5×5.5cm (830 Holes)
-
-
-
- RM10.00
- Breadboard is ideal for beginner to learn in building the circuitry. The breadboard does not require soldering to make connection. Sometimes, it is called as solderless breadboard.
- Add to cart
Breadboard 8.5×5.5cm (400 Holes)
-
-
-
- RM55.00
- The Ethernet Shield is designed to allow the Arduino base module to connect to the internet easily as a standalone unit. The module carries an onboard WIZnet W5100 Ethernet chip, which provides a network (IP) stack capable of both TCP and UDP, as well as a standard RJ45 Ethernet jack.
- Add to cart
Ethernet Shield W5100 w/ Micro SD Card Slot – Arduino Compatible
-
-
-
- RM5.00
- Memudahkan penyambungan cable pada satu nodal. 5Pieces Per Pack
- Add to cart
Extender -5Pieces Per Pack
-
-
-
- RM35.00
- Lithium Battery Rechargeable polymer Li-po. Widely used for remote control model which features high quality and durable performance. This is the best choice for you to enjoy more flying joys. *The brand product not same as shown in the picture
- Add to cart
LiPo Rechargeable Battery 11.1V 1100mAH
-
-
-
- RM75.00
- Lithium Battery Rechargeable polymer Li-po. Widely used for remote control model which features high quality and durable performance. This is the best choice for you to enjoy more flying joys. *The product brand not same as shown in the picture
- Add to cart
LiPo Rechargeable Battery 11.1V 2200mAH
-
-
-
- RM58.00
- Lithium Battery Pack - Expansion Board Power Supply Switch Raspberry Pi direka untuk papan Raspberry Pi 3 Model B yang membolehkan ianya berfungsi sehingga 9 jam menggunakan bateri pada tahap operasi yang minima. Penggunaan yang lebih maksimum mengurangkan tahap ketahanan bateri.
- Add to cart
Lithium Battery Pack – Expansion Board Power Supply Switch Raspberry Pi
-
-
-
- RM16.00
- This Nano Mult-Function expansion board is designed specially for Arduino Nano, solve the problem of wiring confusing when a variety of sensors connected.
- Add to cart
Multi-function I/O Expansion Shield For Arduino Nano
-
-
-
- RM15.00
- This is a design for an open-source prototyping shield for Arduino NG/Diecimila. It has tons of cool features, to make prototyping on your Arduino easy. Shipped with fully assembled.
- Add to cart
Prototyping Shield breadboard
-
-
-
- RM15.00
- The LM2596 regulator is monolithic integrated circuit ideally suited for easy and convenient design of a step−down switching regulator (buck converter).
- Add to cart
Stepdown Module
-
-
-
- RM60.00
- This is revision 2.0 of USB Host Shield. Thanks to new interface layout it is now compatible with more Arduinos - not only UNO and Duemilanove, but also big Mega and Mega 2560 work with Standard variant of this shield out of the box.
- Add to cart
USB Host Shield 2.0 – Arduino Compatible
-
-
-
- RM30.00
- DSN6009 4A is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM2577.
- Add to cart
XL6009 DC-DC Adjustable Step-up Voltage Booster Module
-
